For Your Safety
Do not attempt to repair the power cord or plug. If the power cord or plug is damaged or frayed, contact an authorized service representative for a replacement.
Ensure that the plug connection is free of dust. In a damp environment, a contaminated connector can draw a significant amount of current that can generate heat and eventually cause fire if left unattended over an extended period of time.
Never touch the plug with wet hands.
Danger of electric shock exists.
Stop operation immediately if the unit emits smoke, excessive heat, abnormal smell or unusual noise. These conditions can cause fire or electric shock. Immediately turn the unit off and unplug the power cord, and contact your dealer for service.
When disconnecting the unit, grasp the plug instead of the cord. Pulling on a cord forcibly can damage it and cause fire or electric shock.
During thunderstorms, do not touch the unit and plug. It may cause an electric shock.
Installation and Relocation
When the unit will no longer be used, in order to prevent it from falling, do not leave the unit installed, but remove it. If the unit falls, it can cause injury.
Operating Safeguards
If metal fragments or water gets into the unit, turn the unit off and unplug the unit immediately. Contact your dealer for service. Operating the contaminated unit can cause fire or electric shock.
Never open or remove unit covers that are screwed with screws unless specifically instructed in the “Operating Instructions”. A
Do not alter the unit or modify any parts. Alteration or modification can cause fire or electric shock.
CHOKING HAZARD
Keep the marker’s cap, battery, SD memory card or USB flash memory device out of reach of children to prevent chocking.
Battery
Use only the specified type of battery. Using the incorrect type of battery can result in overheating/burning or leakage of battery acid.
Make sure that the battery is installed with the correct polarity as indicated on the battery holder. Incorrectly installed batteries may burst or leak, resulting in injuries.
Batteries that seem worn down or damaged should not be used. Using worn down or damaged batteries may result in leaking.
Do not charge, short, heat, break or throw in a fire, as it may result in the battery leaking, generating heat, or bursting.
When disposing of the battery, cover the battery contacts with insulation (ex. tape). Direct contact with other batteries may result in leaking, fire, or explosion.
Do not solder the battery, as it may result in the battery leaking, generating heat, or bursting.
Before You Start
9