Peerless Industries PRG-1 manual Cable Management, Cables with Combination VGA Connector RCA Plugs

Cable Management

fig. 8.1

To make an opening to route cables through

8 projector mount assembly, adjust projector mount assembly to full upward tilt position by turning knob for tilt adjustment as shown in fi gure 8.2. Left or right roll position can be adjusted if more space is required.

NOTE: Be certain tamper resistant screws are not engaged before making adjustments (see step 9).

Route cables through top of extension column as shown in fi gure 8.1 and fi gure 8.2.

NOTE: A method for assisting cables through extension column may be required (example: string tied to connector to help pull through extension column).

Route cables through projector mount assembly as shown in fi gure 8.2 and connect to projector.

CABLES WITH COMBINATION

OF VGA CONNECTOR

AND RCA PLUGS

BEND WIRES OF RCA

PLUGS IN OPPOSITE

DIRECTION

ROUTE CONNECTOR THROUGH FIRST

DO NOT

CRIMP

WIRES

NOTE: INNER DIAMETER OF EXTENSION COLUMN MAY NOT ALLOW PASSAGE FOR ALL CONNECTOR TYPES.

CABLE

CONNECTOR

INNER

DIAMETER OF

EXTENSION

COLUMN

fig. 8.2

EXTENSION COLUMN

KNOB

FOR ROLL

ADJUSTMENT

OPENING

FOR ROUTING

CABLES

KNOB FOR TILT ADJUSTMENT

10 of 13 ISSUED: 08-15-07 SHEET #: 055-9491-7 06-11-11

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.