Peerless Industries PRG-1S Installation to Extension Column / Ceiling Plate, Skip to step

Page 4

Installation to Extension Column / Ceiling Plate

NOTE: Refer to accompanying instructions with ceiling plates (sold separately) for installing these models to

1 ceiling.

Screw projector mount assembly (A) onto extension column as shown in figure 1.1. Tighten swivel stop screw against extension column, fl ush mount tube or reducer using 4mm security allen wrench (B) as shown in figure 1.2.

NOTE: Swivel stop screw is used to jam against threads of extension column, fl ush mount tube or reducer to prevent any excess movement of projector mount assembly (A). Do not overtighten screw; overtightening screw will damage threads making it diffi cult to separate products.

Skip to step 5.

1-1/2" EXTENSION COLUMN (SOLD SEPARATELY)

(UL LISTED EXT OR AEC SERIES)

A ARROW

INDICATES FRONT

OF MOUNT

fig. 1.1

CMJ 455

(SOLD SEPARATELY)

SWIVEL STOP SCREW

fig. 1.2

4 of 13

ISSUED: 08-15-07 SHEET #: 055-9491-7 06-11-11

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-865-2112 or 708-865-8870.

Image 4
Contents Features Models PRG-1, PRG-1S, PRG-1WTools Needed for Assembly Table of ContentsParts List Installation to Extension Column / Ceiling Plate Skip to stepInstallation To Wood Joist Ceilings Installation to Concrete Ceilings Illustration aInstallation to Threaded Rod Not evaluated by UL Professional installation onlyInstalling PAP-UNV Adapter Plate sold separately Attaching Adapter Plate to ProjectorAttaching Adapter Plate to Projector Mount Arrow Indicates Front of Mount Captive ScrewCables with Combination VGA Connector RCA Plugs Cable ManagementProjector Alignment PRG Series Projector Mount Accessories Cord Management