Installation to Threaded Rod
(Not evaluated by UL - Professional installation only)
Thread two 1/4-20 hex thin nylon-insert locknuts (not included) on two 1/4-20 threaded rods (not included) to the
4 desired height of projector mount assembly. Attach projector mount assembly (A) to the two 1/4-20 threaded rods using two 1/4-20 hex thin nylon-insert locknuts as shown in figure 4.1 or figure 4.2.
1/4-20 THREADED
1/4-20 THREADEDROD (NOT INCLUDED) ROD (NOT INCLUDED)
1/4-20 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED)
1/4-20 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED)
| A | A |
| ARROW | ARROW |
| INDICATES |
| INDICATES FRONT |
| FRONT OF |
| OF MOUNT |
| MOUNT |
| |
| 1/4-20 HEX THIN | 1/4-20 HEX THIN NYLON- |
| NYLON-INSERT |
| INSERT LOCKNUT |
| fig. 4.1 | LOCKNUT | (NOT INCLUDED) | fig. 4.2 |
| (NOT INCLUDED) |
| |
7 of 13 | ISSUED: 08-15-07 SHEET #: 055-9491-7 06-11-11 |
Visit the Peerless Web Site at www.peerlessmounts.com | For customer care call 1-800-865-2112 or 708-865-8870. |
