For standard paper sizes, this setting determines default margins and expected length for each printed page. For ‘Custom’ sizes, margins and length may be set using the commands ‘Form Length’, ‘Bottom Margin’, ‘Left Margin’ and ‘Right Margin’.
‘Letter’ size assumes an
‘Legal’ size assumes an
‘A4’ size assumes an 8.27 x 11.7” (210 x 297mm) page, sets a total printable height of 11.36” (288.5mm), top and bottom margins of about 0.27” (6.9mm) and 0.06” (1.5mm) respectively. Printable width is set to 8.0” (203.2mm) with 0.13” (3.3mm) margins on either side.
‘Custom’ size allows the setting of length of the form, bottom margin, and left and right margins using those commands.
A Note about Text Mode:
The Printers can print either Raster Graphics or Text Mode. The choice is determined automatically by the data stream sent from the host device to the printer.
Raster Graphics is the most common form of usage for the PocketJet. The printer uses
In Text Mode, the Printers will print only the characters contained in the resident character set. For the PocketJet 3 and PocketJet 3 Plus, this character set is the Epson® ESC/P emulation in native serif and sans serif fonts in 10, 12, 15cpi, and proportional sizes.
Print Density:
This sets the default print density (darkness) of the printing. Darker print will use more battery power, but may be easier to read if the font or other printed information is made up of very narrow lines. If battery conservation is more important, adjusting
Page 23