Brother PJ-522 manual Removing the Battery, Instructions for removing the battery

Page 49

Removing the Battery

1.Open the printer’s battery cover by pressing the cover latch. Swing the cover open and remove it.

2.Pull out on the battery removal ribbon as shown in Figure 13 until the battery starts to tilt out of its compartment.

NOTE: If the battery removal ribbon is caught behind the battery, insert a thin metal object such as a flat-blade screwdriver between the battery and the case at the end away from the AC adapter receptacle and tilt it out of its compartment.

3.Remove the battery from the compartment.

4.Gently pull the battery connector from the terminal inside the printer.

Figure 13. Instructions for removing the battery

Page 38

Image 49

Contents User’s Guide PJ3 Printer name Shorter name Model Name Part NumberContents Tips on Using Paper Safety Information Use Recommendations Ycle Page Page Page Page Page Unpacking the Printer Setting Up the PrinterConnecting the printer to an AC power outlet Connecting to an AC Outlet OptionalConnecting the printer to DC power Connecting to a DC Supply OptionalMain Switch Functions Using the Operation PanelIndicator Lights Printing Solutions Using the PrinterCD Install Driver InstallationManual Install Accessing Advanced Software SettingsUn-Install Text ModeOperating System Considerations Ply ModeDensity Modes Form Feed ModesCut Sheet Paper Selecting MediaNon-Perforated Roll Paper Perforated Roll Paper Windows Vista Notes Windows-Specific Operating System FeaturesWindows XP / 2000 Professional Notes Via USB Cable Connecting to Your ComputerVia Infrared IrDA Via Bluetooth Bluetooth Models OnlyInserting a sheet of paper PrintingMaking Prints Lighter or Darker Turning the Printer OFFInstalling the PocketJet 3 Utility PocketJet Configuration UtilityUsing the PocketJet 3 Configuration Utility Menu Bar File Menu Bluetooth MenuPage Page Paper Size Configuration Options Dropdown Menu Selections PrinterPrint Density Auto-On Form Feed ModeAuto-Off CR-LF ModePre-Feed Page Form Length Bottom Margin Left Margin Text Line Spacing Right MarginDefault Pitch Default FontExtended Characters Character Set Map Page Page Factory Reset CleanSave Config ClosePushing the battery connector into the terminal Installing the Battery OptionalPage Instructions for removing the battery Removing the BatteryStopping the Charge Process Charging the BatteryTips on Using the Battery Inserting Paper Tips on Using PaperUsage and Handling Instructions Use Brother Genuine Thermal paperMethod Clearing a Paper JamPage Maintaining the Printer Cleaning the Print HeadInserting the cleaning cloth Cleaning the Platen Roller Cleaning the platen roller Cleaning the Printer’s Exterior Page Indicator Light Table Indicator LightsReference Power indicator light does not light Indicator Light WarningsNo Battery Found When Charging Low Thermal Head Temperature Time-Out When ChargingHigh Thermal Head Temperature Data Receive ErrorSelf-Test Feature Overview TroubleshootingPrinted Image Problems Paper ProblemsPaper is jammed in the printer Printed image is out of alignmentImage has light or white vertical lines Image is compressed and stretched in many placesAll pages have a white vertical line All pages have a black vertical lineSide margins are incorrect Top margin is incorrectPrint does not contain the proper characters Print contains random dotsPages Don’t Print Green Data indicator remains lit but does not blinkPages Are Partially Printed Technical Information Regulatory Page Page Page Page United States FCC Regulations Radio & Television InterferenceCanadian Regulations Consumables Ordering InformationUploadable Fonts Appendix I Character Set Tables