Inserting a Tape Cassette
Tape cassettes of 0.13", 0.23", 0.35", 0.47", 0.70" or 0.94" (3.5mm, 6mm, 9mm, 12mm, 18mm, or 24mm) width can be used in your
cassettes with the mark.
• If the new tape cassette has a cardboard stopper, be sure to remove the stopper before inserting the cassette.
•If the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow as shown on the tape cassette.
z GETTING STARTED
1
Check that the end of the tape is not bent and that it passes through the tape guide. If the tape is not passed through, pass it through the tape guide referring to the illustration.
End of tape
Tapeguide
1
2After making sure that the power is off, lift open the tape compartment cover. If there is already a tape cassette in the machine, remove it by pulling it straight up.
2
3
4
5
6
7
8
9
Inserting a Tape Cassette
18 |