Brother PT-2730, PT2730VP manual Entering Bar Code Data, ZSpecial Character Listz

EDITING A LABEL

Entering Bar Code Data

1

Press the Bar Code key.

The Bar Code Input screen is displayed.

Up to five bar codes can be entered on a label.

2

Type in the bar code data.

Special characters can be entered in the bar code when using the CODE39, CODABAR, CODE128 or GS1-128 (UCC / EAN-128) protocols. When not using special characters, go to step 5.

3

Press the Symbol key.

A list of characters available for the current protocol is displayed.

4

Select a character using the or key, then press the OK or Enter key to insert the character in the bar code data.

5

Press the OK or Enter key to insert the bar code in the label.

The bar code is displayed on the text entry screen.

•Press the Escape key to return to the previous step.

•Refer to the Special Characters List table for a list of all available settings.

zSpecial Character Listz

CODE39

Code	Special Character
0
1
2	(SPACE)
3
4
5
6

CODABAR

Code	Special Character
0
1
2
3
4
5

51

Creating a Bar Code Label