Brother MFC/HL-P2000 manual Copying in Standard Mode, To Make Settings for Each Copy

CHAPTER 4 COPY

CHAPTER 4

COPY

The machine allows you to make high-quality photocopies. Always make sure that paper is loaded in the Sheet Feeder before making copies.

150%		Copy
120% LGL >LTR	Enlarge/
78%			Stop
	Reduce
50%		Copy
	Photo

HL-P2000

Print Copy Scan

A6 @A4				Copy
A5 @A4		Enlarge/
A4	@A5			Stop
	A4 @A6 Reduce		Photo
				Copy

Fig. 4-1 Control Panel for Copying and Scanning Functions

COPYING IN STANDARD MODE

1.Insert the original document face down in the Document Feeder.

2.Press the Copy button.

To stop copying, press the Stop button. The machine shows “E” on the display. Press the Stop button again to eject the original document.

TO MAKE SETTINGS FOR EACH COPY

You can make various settings. These settings are effective only for the next copy and after that the settings are cleared. The number of copies should be set after Enlarge/Reduce and Quality settings have been made.

Enlarge/Reduce - Enlargement / Reduction ratio

Photo/Text -Copy output mode

Copies - the number of copies

4-1