Brother MFC/HL-P2000 manual Copy, Scan

USER’S GUIDE

Copy

Question	Recommendation
The machine does not copy.	Check the following;
	The machine is turned on.
	All of the protective parts have been removed.
	￿The top cover is closed.
	The Alarm LED is blinking. If the LED is
	blinking, refer to the Operator Calls section of this
	manual.
The machine copies, but	check if;
nothing is printed on the copy.	Original documents are inserted face down in the
	document feeder.
	The toner cartridge is not empty.
Copy has a vertical line.	Clean the scanning unit refering to ‘Cleaning the
	Scanning Unit’ section in Chapter 6.
Some portion of the image is	The machine has unscannable and unprintable
missing on the copy.	areas. Check the areas in Chapter 2.
	If the image is larger than the paper size, it may be
	lost.
Memory full error.	A DOS application is using download fonts and
	￿the memory is almost full.
	After a memory full error occurs, the machine
	clears any downloaded fonts automatically.
Scan
Question	Recommendation
The machine does not scan	Check the following;
	The machine is turned on.
	All of the protective parts have been removed.
	The top cover is closed.
Computer indicates an error	Check the following;
message other than above.	The machine is connected directly to the
	computer.
	The computer can work in bi-directional mode.
	The scanner port is correctly set on your
	computer.
	The Scanner driver is correctly selected in your
	￿application.
	A recommended interface cable is being
	used.(IEEE 1284 compliant)
Scanned image has vertical	Clean the scanning unit.
white or black line.

7-14