Brother MFC/HL-P2000 manual Functions, Electrical and Mechanical

Page 73

 

 

APPENDIX

Functions

 

 

TrueType Fonts on disks

TrueType-compatible soft-fonts for Windows on the supplied

 

disk

 

Emulation

Brother Printing Solution for Windows

 

Automatic emulation selection among HP LaserJet

Printer Driver

IIPWindows(PCL ￿level3.1/3.11,4), EPSONWindowsFX-￿850,95 andor IBMWindowsProprinterNT￿XL4.0

 

driver, supporting Brother Native Compression mode and bi-

 

directional capability

 

Interface

Bi-directional parallel

 

Memory

2 MB

 

Diagnostics

Self-diagnostic program

 

Electrical and Mechanical

 

Power Source

U.S.A. and Canada:

AC 110 to 120 V, 50 / 60 Hz

 

Europe and Australia:

AC 220 to 240 V, 50 /60 Hz

Power Consumption

Printing:

280 W or less

 

Stand-by:

60 W or less

 

Sleep:

13 W or less

 

Copying:

180W or less

Noise

Printing:

49 dB A or less

 

Sleep:

33 dB A or less

Temperature

Operating:

10 to 32.5°C (50 to 90.5°F)

 

Storage:

0 to 40°C (38 to 104°F)

Humidity

Operating:

20 to 80% (without condensation)

 

Storage:

20 to 80% (without condensation)

Dimensions (W x H x D) 390 x 282 x 371 mm (14.4 x 11 x 14.5 inches)

 

(when the output tray is closed.)

Weight

Approx. 8.5 kg (18.7 lb.) including the drum unit

A-3

Image 73
Contents MFC/HL-P2000 Please read this manual thoroughly before using the machineTable of Contents Copy Troubleshooting To Use the Machine Safely Definitions of Warnings, Cautions, and NotesShipment of the Machine For USA & Canada Only About the Guidebooks Finding Out How to Use the MachineMachine Overview About Your MachineHigh Resolution and Fast Printing Speed FeaturesVersatile Paper Handling CopierRemote Printer Console Program for DOS Twain Compliant Scanner DriverPopular Printer Emulation Support Sleep Mode Power Save Mode Environment-Friendly Economy Printing ModeEnhanced Memory Management Low Running CostOperating and Storage Environment Power SupplyEnvironment Introducction Paper Specifications Cut Sheet RemarksLabels / Transparencies Fan the Paper Straighten the Paper Special PaperEnvelopes EnvelopesPaper Capacity in Document Feeder Document SpecificationsMULTI-PURPOSE Sheet Feeder for Printing Opening the Feeder Loading Paper or Envelopes in the Feeder Loading Paper into the FeederMoving the Paper Guide Closing the Feeder Two Side Printing Manual Duplexing Opening the Output Tray Extending the Extension Support Wire Output Tray and Paper Support WireReady Paper Lamp Lamps and SwitchData Toner Lamp Alarm LampDrum Lamp Other Control Features SwitchSleep Mode Alarm Test Print ModeDrum ReadyTo Make Settings for Each Copy Copying in Standard ModeEnlarge/Reduce Photo/TextEnlarge and Reduce Number of CopiesError Chapter Scan Software MFC-P2000 Scan Replacing the Toner Cartridge Chapter MaintenanceRemoving the Drum Unit Turning the Lever to Close the Shutter Removing the Old Toner Cartridge Turn the drum unit upside down gently Cleaning the Primary Corona Wire 11 Drum Unit Nearly at the End of its Life Replacing the Drum Unit12 Removing the Drum Unit 14 Removing the Toner Cartridge Do not remove the starter sheet17 Installing the Drum Unit Cleaning the Machine Exterior Cleaning the Machine20 Turning off the Switch and Unplugging Cleaning the Machine Interior and Drum UnitGently wipe the scanner window with a soft dry cloth See the section Replacing the Drum Unit in this chapter 24 Cleaning the Scanning Unit Cleaning the Scanning UnitRE-PACKING the Machine 25 Removing the Drum Unit Assembly26 Placing the Drum Unit in the Plastic Bag Alarm ↔ Alarm Indications AT a GlanceOperator Calls for the Printing Function Paper ↔Page Operator Calls for the Copying and Scanning Functions Drum Alarm Ready Data Service Calls for the Printing FunctionService Calls for the Copying and Scanning Functions Locating Paper Jam Position Paper JamsDo not pull the Jammed Paper from the Output Tray Paper Jam near the Drum Unit Paper Jam in the Document Feeder Setting Up the Machine for Windows Setting Up the Machine HardwarePower switch is on Question RecommendationQuestion Setting Up the Machine for DOSPaper Handling Printing Scan CopyTogether right now, over Print QualityToner scatters and stains the printed Machine Interior and Drum Unit Black spots appears on the printed paper at 94mm intervals Appendix Scanning CopyingElectrical and Mechanical FunctionsParallel Interface Specifications Fig. A-1 Parallel Interface Cable Bitmapped Fonts Resident FontsHP LaserJet IIP Mode Symbol SETS/CHARACTER SetsEpson Mode IBM ModeHP LaserJet IIP HP LaserJet IIP, Epson FX-850, IBM Propritner XL USER’S Guide Compilation and Publication Notice TrademarksIndustry Canada Compliance Statement For Canada Only RegulationsInternational Energy Star Compliance Statement Laser Safety For 110-120 V Model OnlyRadio Interference 220-240 V Model Only FDA Regulations For 110-120 V Model Only IEC 825 Specification For 220-240 V Model OnlyDeclaration of Conformity For Europe Atención Geräuschemission / Acoustic Noise Emission For Germany Only Important For Your SafetyImportant Wiring Information For U.K. only Index RPC