Brother 2300 manual Fabric Tape, Washing, Drying, Ironing

Page 25

After the backing tape has been removed, the transferred label may appear glossy. In addition, some white spots may have appeared on the label if it was touched while the backing tape was peeled off. These can be removed by ironing over the label with a piece of cloth placed between the label and the iron.

Since the transferred label cannot be removed once it is applied, make all transfers with care.

Washing:

Garments with transfer labels can be washed over 20 times if the label has been transferred correctly. Normal biological and non-biological household detergents may be used.

The label may become discoloured if the garment is placed in bleach for an extended length of time.

Be careful that hard objects such as buckles or buttons do not come into contact with the label during the wash.

Do not dry clean garments which have had transfer labels applied.

Drying:

Garments with transfer labels may be dried either inside or outside out.

Do not tumble dry. The transfers will come off and may stick to other items of clothing.

Ironing:

Iron garments with transfers using normal temperature settings.

Be sure to place a piece of cloth between the iron and the label when you iron over it to pre- vent the label from sticking to the iron.

The labels are non-toxic, however, please maintain the usual precautions, such as not placing them in your mouth, etc.

Do not store the tape cassette in areas exposed to direct sunlight, high humidity or dust.

FABRIC TAPE

Fabric tape is used to attach a piece of fabric printed with your text onto garments using an iron. After printing the text onto fabric tape and cutting off the label using scissors, place the label on an ironed garment at the location where you wish to attach it in such a way that the printed text can be read correctly. Cover the label with another piece of cloth and use an iron set to a medium-high temperature (320 to 356 ˚F (160 to 180 ˚C)) to press down firmly for 10 to 15 seconds. For more details, refer to the instructions included with the fabric tape cassette.

21

Image 25

Contents 2300 Canadian Department of Communications Compliance Statement IntroductionContents Page General Description Getting StartedGeneral Precautions To change the batteries BatteriesUse eight AA alkaline batteries in this machine To connect the optional AC adaptor Optional AC AdaptorTo change the tape cassette Tape CassetteTo connect the P-touch to the computer Connecting the P-TOUCH to a ComputerTo install the P-touch Editor software Installing P-TOUCH EditorHard disk free space At least 20 MB Available memory Minimum 32 MBPage For a Custom installation To install the USB printer driver Page To replace, add or delete the printer driver Page On a Macintosh Computer For a basic installationFor a Custom installation To select the PT-2300/2310 as the printer Starting P-TOUCH EditorTo delete P-touch Editor Version 3.1 and the printer driver To start up P-touch EditorTitle bar Barcodes Attaching LabelsDatabases Laminated TapeINSTANT-LETTERING Tape RUB-ON Transfers NON-LAMINATED TapeIRON-ON Transfer Tape Washing Fabric TapeDrying IroningPrint Head & Rollers To clean the print head and rollersStamp Tape Cursor Keys Power KEYLeft Cursor KEY Right Cursor KEY CODE, ALT & Shift KeysUP Cursor KEY Down Cursor KEYALT KEY To start the Symbol functionTo type To type in % Shift KEYTo type in many capital letters Return KEY Space KEYTo add a space Tape widths Maximum number of lines that can be printed TAB FunctionTo add a new line To select an item from a listTo add a tab To set the tab lengthTo set the tab length to To delete one character Delete KEYLine OUT Function To clear the text and formats Clear FunctionTo clear just the text To delete just the textLetters Accented characters Accent FunctionTo type in an accented character C E N T Symbol FunctionTo type in a symbol Group SymbolTo add the symbol Auto Format Function Stamp Function To select a preset formatTo make a stamp To afﬁx a stamp To cut a stampFold over To select the Font 2 font setting To change the font settingFont Function Size & Width Functions Width setting Width setting WideTape widths Sizes in points To select the 24 point size setting To change the size settingTo select the Wide width setting To change the width settingTo change the style setting Style FunctionFont Style setting Setting To select the I+SHAD style settingUnderline Function Font Setting Style settingTo turn on or off the Underline function To change the frame setting To select the Undl on underline settingFrame Function Tape Margin Function To select the candy frame settingTo select the Half tape margin setting To change the tape margin settingHorizontal Alignment Function Mirror Printing Function To change the horizontal alignment settingTo select the on mirror printing setting To turn on or off the mirror printing settingLength Function To select a label length To turn on or off the Length functionTo turn on the Auto cut function Auto CUT FunctionFeed & CUT Function Print KEYTo print a label To feed and cut off 1 24 mm of tapeTo use the Numbering function Numbering FunctionTo print three labels with numbers 1, 2 To use the Repeat printing function Repeat Printing FunctionTo print three copies of a label Storing Text Memory FunctionsTo store a text file To overwrite the stored file with the new oneDeleting a File Recalling TextTo recall a text file To delete a text fileTo recall the text from ﬁle number To store text under ﬁle numberTo delete the text stored under ﬁle number Problem Remedy TroubleshootingCause Remedy Error Message ListCutter Tape Hardware SpecificationsSoftware Supplies AccessoriesStock No Description 12mm-wide laminated tapes QTY SH-MB Stock No Description Price Quantity Total Accessory Order FormAccessory Order Form LA6059001