Brother 2300 CODE, ALT & Shift Keys, Right Cursor KEY, UP Cursor KEY, Down Cursor KEY, Code KEY

Page 28

RIGHT CURSOR KEY

To move the cursor one character to the right:

●Press w once.

To move the cursor several characters to the right:

●Hold down w until the cursor moves to the desired position.

To move the cursor to the end of the current line:

●Hold down c and press w.

UP CURSOR KEY

To move the cursor up to the previous line:

●Press h once.

☞If the cursor is in the ﬁrst line of text, it will move to the beginning of the line.

To move the cursor up several lines:

●Hold down h until the cursor moves to the desired position.

To move the cursor to the beginning of the entire text:

●Hold down c and press h.

DOWN CURSOR KEY

To move the cursor down to the following line:

●Press e once.

☞If the cursor is in the last line of text, it will move to the end of the line.

To move the cursor down several lines:

●Hold down e until the cursor moves to the desired position.

To move the cursor to the end of the entire text:

●Hold down c and press e.

CODE, ALT & SHIFT KEYS

Most characters can be entered simply by pressing their keys. However, to use special func- tions or to enter capital letters, accented characters and some symbols, the following special keys are necessary.

CODE KEY

To use a function printed above a key:

●Hold down c and press the key immediately below the desired function.

24

Image 28

Contents 2300 Introduction Canadian Department of Communications Compliance StatementContents Page Getting Started General DescriptionGeneral Precautions To change the batteries BatteriesUse eight AA alkaline batteries in this machine Optional AC Adaptor To connect the optional AC adaptorTape Cassette To change the tape cassetteConnecting the P-TOUCH to a Computer To connect the P-touch to the computerInstalling P-TOUCH Editor To install the P-touch Editor softwareHard disk free space At least 20 MB Available memory Minimum 32 MBPage For a Custom installation To install the USB printer driver Page To replace, add or delete the printer driver Page For a basic installation On a Macintosh ComputerFor a Custom installation Starting P-TOUCH Editor To select the PT-2300/2310 as the printerTo delete P-touch Editor Version 3.1 and the printer driver To start up P-touch EditorTitle bar Attaching Labels BarcodesDatabases Laminated TapeNON-LAMINATED Tape INSTANT-LETTERING Tape RUB-ON TransfersIRON-ON Transfer Tape Fabric Tape WashingDrying IroningPrint Head & Rollers To clean the print head and rollersStamp Tape Cursor Keys Power KEYLeft Cursor KEY CODE, ALT & Shift Keys Right Cursor KEYUP Cursor KEY Down Cursor KEYALT KEY To start the Symbol functionTo type To type in % Shift KEYTo type in many capital letters Return KEY Space KEYTo add a space TAB Function Tape widths Maximum number of lines that can be printedTo add a new line To select an item from a listTo add a tab To set the tab lengthTo set the tab length to Delete KEY To delete one characterLine OUT Function Clear Function To clear the text and formatsTo delete just the text To clear just the textLetters Accented characters Accent FunctionTo type in an accented character Symbol Function C E N TTo type in a symbol Group SymbolTo add the symbol Auto Format Function Stamp Function To select a preset formatTo make a stamp To cut a stamp To afﬁx a stampFold over To select the Font 2 font setting To change the font settingFont Function Size & Width Functions Width setting Width setting WideTape widths Sizes in points To change the size setting To select the 24 point size settingTo change the width setting To select the Wide width settingTo change the style setting Style FunctionTo select the I+SHAD style setting Font Style setting SettingUnderline Function Font Setting Style settingTo turn on or off the Underline function To change the frame setting To select the Undl on underline settingFrame Function To select the candy frame setting Tape Margin FunctionTo select the Half tape margin setting To change the tape margin settingHorizontal Alignment Function To change the horizontal alignment setting Mirror Printing FunctionTo select the on mirror printing setting To turn on or off the mirror printing settingLength Function To turn on or off the Length function To select a label lengthAuto CUT Function To turn on the Auto cut functionPrint KEY Feed & CUT FunctionTo print a label To feed and cut off 1 24 mm of tapeTo use the Numbering function Numbering FunctionTo print three labels with numbers 1, 2 Repeat Printing Function To use the Repeat printing functionTo print three copies of a label Memory Functions Storing TextTo store a text file To overwrite the stored file with the new oneRecalling Text Deleting a FileTo recall a text file To delete a text fileTo store text under ﬁle number To recall the text from ﬁle numberTo delete the text stored under ﬁle number Troubleshooting Problem RemedyError Message List Cause RemedyCutter Tape Hardware SpecificationsSoftware Supplies AccessoriesStock No Description 12mm-wide laminated tapes QTY SH-MB Accessory Order Form Stock No Description Price Quantity TotalAccessory Order Form LA6059001