Brother 2300 manual Tape Cassette, To change the tape cassette

Page 9

TAPE CASSETTE

A single TZ tape cassette is supplied with this unit. However, since TZ tape cassettes are avail- able for this machine in a wide variety of colors and sizes, it is possible to make distinctive color-coded and stylized labels.

In addition, this machine has been designed to allow you to change the tape cassettes quickly and easily.

To change the tape cassette:

1Lift open the tape compartment cover. The installed cassette is also released.

2 If a tape cassette is already installed, remove it by pulling it straight up.

3If the ink ribbon in the other tape cassette is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette until there is no slack in the ribbon. Also, make sure that the end of the tape feeds under the tape guides.

☞If you are using a new tape cassette provided with a stopper, be sure to remove the stopper.

4Insert the tape cassette firmly into the tape compartment, making sure that the entire back of the cassette touches the bottom of the compartment.

☞When inserting the tape cassette, make sure that the inner ribbon does not catch on the corner of the metal guide.

5Close the compartment cover, then turn on the machine if it is off.

6Hold down c and press _ once to advance the tape and remove any slack.

5

Image 9

Contents 2300 Canadian Department of Communications Compliance Statement IntroductionContents Page General Description Getting StartedGeneral Precautions Batteries To change the batteriesUse eight AA alkaline batteries in this machine To connect the optional AC adaptor Optional AC AdaptorTo change the tape cassette Tape CassetteTo connect the P-touch to the computer Connecting the P-TOUCH to a ComputerTo install the P-touch Editor software Installing P-TOUCH EditorHard disk free space At least 20 MB Available memory Minimum 32 MBPage For a Custom installation To install the USB printer driver Page To replace, add or delete the printer driver Page On a Macintosh Computer For a basic installationFor a Custom installation To select the PT-2300/2310 as the printer Starting P-TOUCH EditorTo delete P-touch Editor Version 3.1 and the printer driver To start up P-touch EditorTitle bar Barcodes Attaching LabelsDatabases Laminated TapeINSTANT-LETTERING Tape RUB-ON Transfers NON-LAMINATED TapeIRON-ON Transfer Tape Washing Fabric TapeDrying IroningTo clean the print head and rollers Print Head & RollersStamp Tape Power KEY Cursor KeysLeft Cursor KEY Right Cursor KEY CODE, ALT & Shift KeysUP Cursor KEY Down Cursor KEYTo start the Symbol function ALT KEYTo type Shift KEY To type in %To type in many capital letters Space KEY Return KEYTo add a space Tape widths Maximum number of lines that can be printed TAB FunctionTo add a new line To select an item from a listTo set the tab length To add a tabTo set the tab length to To delete one character Delete KEYLine OUT Function To clear the text and formats Clear FunctionTo clear just the text To delete just the textAccent Function Letters Accented charactersTo type in an accented character C E N T Symbol FunctionGroup Symbol To type in a symbolTo add the symbol Auto Format Function To select a preset format Stamp FunctionTo make a stamp To afﬁx a stamp To cut a stampFold over To change the font setting To select the Font 2 font settingFont Function Width setting Width setting Wide Size & Width FunctionsTape widths Sizes in points To select the 24 point size setting To change the size settingTo select the Wide width setting To change the width settingTo change the style setting Style FunctionFont Style setting Setting To select the I+SHAD style settingFont Setting Style setting Underline FunctionTo turn on or off the Underline function To select the Undl on underline setting To change the frame settingFrame Function Tape Margin Function To select the candy frame settingTo change the tape margin setting To select the Half tape margin settingHorizontal Alignment Function Mirror Printing Function To change the horizontal alignment settingTo turn on or off the mirror printing setting To select the on mirror printing settingLength Function To select a label length To turn on or off the Length functionTo turn on the Auto cut function Auto CUT FunctionFeed & CUT Function Print KEYTo print a label To feed and cut off 1 24 mm of tapeNumbering Function To use the Numbering functionTo print three labels with numbers 1, 2 To use the Repeat printing function Repeat Printing FunctionTo print three copies of a label Storing Text Memory FunctionsTo store a text file To overwrite the stored file with the new oneDeleting a File Recalling TextTo recall a text file To delete a text fileTo recall the text from ﬁle number To store text under ﬁle numberTo delete the text stored under ﬁle number Problem Remedy TroubleshootingCause Remedy Error Message ListCutter Tape Specifications HardwareSoftware Accessories SuppliesStock No Description 12mm-wide laminated tapes QTY SH-MB Stock No Description Price Quantity Total Accessory Order FormAccessory Order Form LA6059001