Setting up
9 Setting the dial mode
YES NO
FUNCTION RESOLUTION CONTRAST POLL SPEED DIAL REDIAL
Your DF60 has two dialling modes: TONE and PULSE, it is
If you are in doubt about the right setting for you, contact your communications manager.
To set the Dial mode:
•Press the FUNCTION button until SET OPTIONS? appears.
•Press the YES button and the display shows:
DIAL MODE?
•Press the YES button, display shows:
DIAL MODE: TONE?
•Press the NO button to change from TONE to PULSE.
•When the display shows the dialling mode that is right for you press the YES button, you will hear a tone confirming your selection.
•Press the STOP button to return to standby.
The T/P (T=TONE, P=PULSE) selector on the side of the DF60 main unit T/P must also be switched to the setting you
have selected on the display. This will ensure that calls can still be made during power failure.
9