10 Setting the answer mode
Your DF60 answers calls/receives faxes in one of four modes: TAD, MANUAL, FAX or FAX/TEL. It is preset to TAD mode.
To change the Answer mode:
• Press the FUNCTION button until SET OPTIONS? appears.
• Press the YES button and the display shows:
DIAL MODE?
• Press the NO button, display shows:
ANSWER MODE?
• Press the YES button and the display shows:
ANSWER: followed by one of the available answer options.
• Press the NO button to view the available
options: ANSWER: TAD?
ANSWER: MANUAL?
ANSWER: FAX?
ANSWER: FAX/TEL?
• Press the YES button to select your option.
To switch auto answer mode on/off
If you want to switch your DF60’s auto answer mode on or off:
• Press the FUNCTION and then the REDIAL
• Auto answer mode is switched off.
• Repeat this procedure to switch Auto answer mode back on.
The auto answer mode will be either the default mode or the one you have selected.
Setting up
Which setting is correct for you?
ANSWER: TAD (telephone answering device)
When your DF60 is set to TAD mode it will receive both voice messages and faxes. Calls are answered automatically after the number of rings you have set, and your outgoing message is played back, callers can then leave a message.
If your DF60 detects a fax signal whilst the answer machine is operating, or if no message is left, it will automatically switch to FAX mode and faxes are received as normal.
If you have selected TAD mode the display will show: RING COUNT: 2ND? This means that your DF60 will automatically answer calls after two rings. If you want to change the number of rings before answering, pressing the NO button will display the available options.
•Press the YES button to select your option.
•Press the STOP/CLEAR button to return to standby.