GateWay Fax Systems 90SI manual Print the Default Settings List, Response

Page 11

GateWay Fax Systems, inc.

Model 90si Secure Fax Gateway User's Guide

The following example shows how to change the default configuration to 2-Line Dual-Mode (defined as configu- ration # 03)...

With the Secure Phone idle and only the Green "Power" light illuminated:

Procedure

Press and hold the Reset button on the 90si release Reset Take the fax off- hook *1 Press 0 and then 3 on the fax dial pad

hang up the fax

Response

... until both the Green and Red lights extinguish, then...

the Green light will be extinguished and the Red light illuminated (you will hear dial-tone)

you will hear a beep. (Note: 03 is the configuration code for 2-Line Dual- Mode. See the above Default Settings list for Secure Only, and 1-Line Dual-Mode.

The Green light will blink a number of times. When it illuminated steady the 90si will now be ready and in the 2-Line Dual-Mode configuration.

Notes:

*1 Most fax machines have a button that when depressed, returns dial-tone from the telephone system. This but- ton is often labled Hook, Manual Dial, Monitor, On Hook Dial or something to that effect. Find and use this Hook button on your fax or use the handset. If your fax does not have a handset or a hook button you will need to tem- porarily connect a plain old telephone to the TEL jack on the back of the fax machine to change Default Settings.

2.5Print the Default Settings List

Currently this feature is unavailable but will be provided to you, at no charge, in a future remote software up- grade.

The factory Default Settings List is printed from the 90si to the attached COTS fax and looks like this.

90si Default Settings List: Configuration (select one)

->(01)<- Secure Only (factory default)

(02)1-Line Dual-Mode

(03)2-Line Dual-Mode

Mode (select one)

(04)Half Duplex ->(05)<- Full Duplex Protocol (select one)

(06)Async 2400 Bd

(07)Async 4800 Bd ->(08)<- Async 9600 Bd

(09)Async 19200 Bd

(10)Mil STD Handshake w/o FEC

(11)Mil STD Handshake w/FEC

(12)Mil STD Broadcast w/o FEC

(13)Mil STD Broadcast w/FEC

(14)Ricoh

(15)Compatable

Misc: (select any)

->(16)<- STE Connected

(17) OMNI, Sectera, vIPer, other Connected

www.gwfs.com, 877-951-9800, info@gwfs.com

help line: 877-951-9814

page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model 90si Transmitting a Secure Fax Connecting the Cots fax, 90si and CryptoStep Procedure 90si Quick Reference GuideTable of Contents What in the Box Getting StartedIntroduction Looking at your 90si Reset ButtonTEL Line Connector Choose a Location InstallationMemory Issues Choosing a Cots FaxSecure Only Configuration Recommended Dual Mode Considerations3 Configuration Selection Chart Configuration Secure Non-Secure Description Operation 4 1-Line, Dual-Mode5 2-Line Dual-Mode 6 1-Line Dual-Mode with 910 Option Setting Your Chosen ConfigurationResponse Print the Default Settings ListPress Display Setting Up Your Encryption Device1 L-3 Secure Terminal Equipment STE 2 L-3 Omni / OMNIxi Code SettingGeneral Dynamics Viper General Dynamics SecteraWhile On-Hook Press Display While Off-Hook and in Clear mode Press DisplayMotorola STU-IIB & STU-IIIA Sending a Public Fax Dual-Mode Configurations Only Using your 90siApplying Power Sending a Secure FaxReceiving a Public Fax Dual-Mode Configurations Only Power-upCommunication Errors System ErrorsMIL-STD-161 Protocols Synchronous Selecting a Transmit ProtocolScip Async Protocol Ricoh/Compat Protocols Synchronous Setting and Using the Default Transmit ProtocolOne-Time Transmit Protocol Using a One-Time Transmit Protocol CodeProcedure Response How Will You Know If Theres a problemTroubleshooting Tips General Specifications Warranty InformationWhen All Else Fails...Call Our Help Line SpecificationsDigital Interface Specifications Pin # Description Safety Information and FCC RequirementsImportant Safety Instructions Related Web LinksConsumer Information and FCC Requirements Help line Glossary Protocol Secondary Fax Secure Data ModePrimary Secure Fax Primary Non-Secure FaxVoIP STE Secure Terminal EquipmentSynchronous Two-Line Dual-Mode Configuration
Top Page Image Contents