GateWay Fax Systems 90SI manual Using a One-Time Transmit Protocol Code, Procedure Response

Page 20

GateWay Fax Systems, inc.

Model 90si Secure Fax Gateway User's Guide

The following example shows how to change the default protocol to "Mil STD Handshake w/o FEC" (defined as protocol 10)...

With the Secure Phone idle and only the Green "Power" light illuminated:

Procedure

Response

Press and hold

... until both the Green and Red lights extinguish, then...

the Reset button

on the 90si

 

release Reset

the Green light will be extinguished and the Red light illuminated

Take the fax off-

(you will hear dial-tone)

hook

*1

 

10 on the fax

you will a beep. (Note: 10 is the protocol code for Mil STD Handshake w/o

 

 

FEC. See the above list for the other codes.)

hang up the fax

The Green light will blink a number of times. When it illuminated steady

 

 

the 90si is ready send using the Mil STD Handshake w/o FEC protocol.

Notes:

*1 Most fax machines have a button that when depressed, returns dial-tone from the telephone system. This but- ton is often labled Hook, Manual Dial, Monitor, On Hook Dial or something to that effect. Find and use this Hook button on your fax or use the handset. If your fax does not have a handset or a hook button you will need to tem- porarily connect a plain old telephone to the TEL jack on the back of the fax machine to change Default Settings.

3.9Using a One-Time Transmit Protocol Code

A one-time protocol code allows you use a different protocol (than the default setting) for the current transmission only. The default protocol setting is not effected or changed. You will set-up to transmit a secure fax as normal with one exception; instead of dialing a "1" (to use the default setting), you will substitute one of the follwing one-time codes:

Code

One-Time Transmit Protocol

*10

Async 2400

*11

Async 4800

*12

Async 9600

*13

Async 19,200

*14

Mil-Std-188-161 Handshake w/o FEC (Sync)

*15

Mil-Std-188-161 Handshake with FEC (Sync)

*16

Mil-Std-188-161 Broadcast w/o FEC (Sync)

*17

Mil-Std-188-161 Broadcast with FEC (Sync)

*18

MG3 Ricoh/Compat (Sync)

*19

TBD

*20

TBD

*21

TBD

*22

TBD

*23

TBD

www.gwfs.com, 877-951-9800, info@gwfs.com

help line: 877-951-9814

page 20

Image 20
Contents Model 90si Connecting the Cots fax, 90si and Crypto Step Procedure90si Quick Reference Guide Transmitting a Secure FaxTable of Contents What in the Box Getting StartedIntroduction Looking at your 90si Reset ButtonTEL Line Connector Installation Memory IssuesChoosing a Cots Fax Choose a LocationSecure Only Configuration Recommended Dual Mode Considerations3 Configuration Selection Chart 4 1-Line, Dual-Mode Configuration Secure Non-Secure Description Operation5 2-Line Dual-Mode Setting Your Chosen Configuration 6 1-Line Dual-Mode with 910 OptionPrint the Default Settings List ResponsePress Display Setting Up Your Encryption Device1 L-3 Secure Terminal Equipment STE Code Setting 2 L-3 Omni / OMNIxiGeneral Dynamics Sectera General Dynamics ViperWhile On-Hook Press Display While Off-Hook and in Clear mode Press DisplayMotorola STU-IIB & STU-IIIA Using your 90si Applying PowerSending a Secure Fax Sending a Public Fax Dual-Mode Configurations OnlyPower-up Communication ErrorsSystem Errors Receiving a Public Fax Dual-Mode Configurations OnlyMIL-STD-161 Protocols Synchronous Selecting a Transmit ProtocolScip Async Protocol Setting and Using the Default Transmit Protocol Ricoh/Compat Protocols SynchronousOne-Time Transmit Protocol Using a One-Time Transmit Protocol CodeProcedure Response How Will You Know If Theres a problemTroubleshooting Tips Warranty Information When All Else Fails...Call Our Help LineSpecifications General SpecificationsDigital Interface Specifications Safety Information and FCC Requirements Important Safety InstructionsRelated Web Links Pin # DescriptionConsumer Information and FCC Requirements Help line Glossary Secondary Fax Secure Data Mode Primary Secure FaxPrimary Non-Secure Fax ProtocolSTE Secure Terminal Equipment SynchronousTwo-Line Dual-Mode Configuration VoIP