Speaker Level Subwoofer Connection | Aperion Audio Intimus Series

Connecting Your Subwoofer

Low Level Subwoofer Connection

If your receiver or preamplifier has a “sub-out” connection on the rear panel, you will need a shielded RCA terminated interconnect cable to connect it to the subwoofer. This is the preferred method for connecting your subwoofer.

Left Front

Receiver

Processor/Amplifier

Left	Sub Out	Right
- +		- +

Right Front

NOTE: Your subwoofer is supplied with two low-level inputs (L&R). But if your receiver or processor has a single sub- out connector, connect it to the input labeled “5.1 sub input”; or you can use a “y” plug to connect to both the left and right inputs.

Speaker Level Subwoofer Connection
If you do not		Receiver
have a “sub-		Receiver
	Left Front	Processor/Amplifier
	Left Front
out”	Left	Sub Out Right
out”	- +	- +
connection, or	- +	- +
connection, or
you choose to
use speaker-
level

connections, you will need a

pair of speaker

wires (16 gauge or better) to run from your amp or receiver to the subwoofer speaker level inputs. Then you’ll need another pair of wires to run from the subwoofer speaker level outputs to each speaker. Each pair should be of equal length, keeping excess wire to a minimum.

Right Front