View Menu

The commands under the View menu are as follows:

Toolbar

Select the Toolbar command to alternately hide or show the toolbar.

Status Bar

Select the Status Bar command to alternately hide or show the status bar at the bottom of the main page. The Status Bar displays information for menu items and buttons. The Status Bar also shows who's parameters are currently displayed.

Show Phase Response

The Phase Response has three different display modes: Off, On (located center screen) and On (located at top half). The display rotates through these three states as the menu (or tool bar) command is selected. The phase range is always +180 degrees to -180 degrees but the scale division varies with the selected impedance range (in order to use the same grid lines as impedance).

Grid in Front

Displays the grid in front of data on the main screen in order to facilitate reading precise signal levels. Normally the grid is displayed behind the data.

Background Color

Selects the background color for the main screen. The trace and grid colors also change with each background color. Choices are: Black, White, Green, Light Gray and Dark Gray.

Save to Memory

These commands cause the plot on the Workbench to be saved to the selected Memory along with all the driver parameters.