Dayton WT3 manual

Page 30

at 0 degrees except for a slight rise at the high frequency limit. Here the measured value of 9.998 Ohms is seen to closely match the resistor's specified value of 10 Ohms +/- 0.1%.

At full playback volume the "noise" on the measurement is usually only one or two pixels as seen above. Higher noise levels can indicate that the test signal level was low and should be raised.

Image 30

Contents Online User’s Guide Minimum Requirements for the PC Install the WT3 software Set the Windows Volume Controls to MaximumLaunch the WT3 application software Page Measure the drivers Vas After measuring the driver you canPlease Note is Critical for Windows Vista Users Click OK to close the Sound control panel Introducing WT3 WT3 Toolbar Using the WT3 Memories Page Page Frequently Asked Questions about WT3 Removing WT3 from your Computer File Menu Page Page Edit Menu Page View Menu Page Impedance Analyzer Menu Page Page Help Menu Using WT3 to Measure a Woofers Parameters Using WT3 to Measure a Tweeters Parameters Page Using WT3 to Measure a Resistor Page Using WT3 to Measure an Inductor Page Using WT3 to Evaluate a Closed Box Loudspeaker Page Using WT3 to Evaluate a Vented Box Loudspeaker Page Page Using WT3 to Evaluate a Complete Speaker System Page Using WT3 to Diagnose Loudspeaker Fault Conditions Page Page Page Using WT3 to Design a Zobel Network Page Page

WT3 specifications

The Dayton WT3 is a sophisticated and highly regarded tool in the field of audio measurement and analysis, particularly known for its precision in loudspeaker testing. This comprehensive device integrates several advanced features and technologies, making it an essential choice for audio professionals, engineers, and hobbyists alike.

One of the standout characteristics of the Dayton WT3 is its dual-channel capability, allowing users to conduct simultaneous measurements of two different loudspeakers. This feature is particularly useful in stereo systems where matching drivers is essential. The WT3 utilizes a high-resolution analog-to-digital converter (ADC) that ensures accurate and detailed frequency response measurements, providing users with the data they need to refine and optimize their audio setups.

The WT3 is equipped with a user-friendly interface that simplifies the measurement process. Its software is intuitive and runs on Windows, which means that users can easily navigate through various options to configure tests and analyze results. The inclusion of a built-in microphone makes it possible to perform room acoustics measurements, further enhancing its versatility.

Another key technology integrated into the Dayton WT3 is its frequency sweep capability. By generating continuous sine wave sweeps across a wide frequency range, the WT3 can analyze the response of loudspeakers in real-time. This allows for identifying resonances, distortion, and other critical parameters that affect sound quality.

The WT3 also features a range of measurement modes, including impedance measurements, which can be invaluable for understanding how a loudspeaker behaves across different frequencies. This data is displayed in easy-to-read graphs and charts, facilitating a straightforward interpretation of results.

Moreover, the Dayton WT3 utilizes advanced signal processing algorithms that help in reducing noise and other unwanted artifacts that can skew measurements. The device's accurate phase response measurement capability further distinguishes it from competitors, providing essential data for crossover design and speaker alignment.

In summary, the Dayton WT3 combines advanced measurement technology with an intuitive user experience, making it an essential tool for those seeking precise loudspeaker performance insights. Its features and capabilities position it as a valuable asset for both professional audio engineers and enthusiasts dedicated to achieving the best possible sound quality. Whether for designing new speakers or optimizing existing setups, the WT3 delivers reliable performance and accuracy.