Dayton WT3 manual Click OK to close the Sound control panel

Page 7

3. Click OK to close the "Sound" control panel.

Note that this setup must be performed once for each USB port with which the WT3 unit will be used. Also, when starting WT3, always click on the Speaker icon in the task bar and make sure the Windows Volume Control is set at maximum.

Image 7

Contents

Online User’s Guide Minimum Requirements for the PC Set the Windows Volume Controls to Maximum Install the WT3 softwareLaunch the WT3 application software Page After measuring the driver you can Measure the drivers VasPlease Note is Critical for Windows Vista Users Click OK to close the Sound control panel Introducing WT3 WT3 Toolbar Using the WT3 Memories Page Page Frequently Asked Questions about WT3 Removing WT3 from your Computer File Menu Page Page Edit Menu Page View Menu Page Impedance Analyzer Menu Page Page Help Menu Using WT3 to Measure a Woofers Parameters Using WT3 to Measure a Tweeters Parameters Page Using WT3 to Measure a Resistor Page Using WT3 to Measure an Inductor Page Using WT3 to Evaluate a Closed Box Loudspeaker Page Using WT3 to Evaluate a Vented Box Loudspeaker Page Page Using WT3 to Evaluate a Complete Speaker System Page Using WT3 to Diagnose Loudspeaker Fault Conditions Page Page Page Using WT3 to Design a Zobel Network Page Page