Dayton WT3 manual

Page 34

Here is a typical result when measuring a single full range driver in a closed box type enclosure:

By inspecting the impedance plot we can determine that this is a closed box type of loudspeaker system from the presence of the single impedance peak in the low frequency range. From the impedance plot alone we can identify the closed box resonance frequency F(sc) = 95 Hz by reading the center frequency of the impedance peak from the frequency scale below. The impedance rise at higher frequencies is due to the inductance of the voice coil. At very low frequencies (1 Hz) the system's DC resistance is seen to be about 3 Ohms. The height of the impedance peak is largely dependent of the mechanical Q of the driver or system. The Measured Parameters bar at the right side of the screen show that this closed box system's resonance is at 95.55 Hz with a system Q(tc) of 0.6232 (displayed in the Q(ts) field). The system's Q(ec) and Q(mc) appear in the Q(es) and Q(ms) fields respectively, for a closed box measurement. The R(e) field gives the DC resistance of the system.

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Online User’s Guide Minimum Requirements for the PC Set the Windows Volume Controls to Maximum Install the WT3 softwareLaunch the WT3 application software Page Measure the drivers Vas After measuring the driver you canPlease Note is Critical for Windows Vista Users Click OK to close the Sound control panel Introducing WT3 WT3 Toolbar Using the WT3 Memories Page Page Frequently Asked Questions about WT3 Removing WT3 from your Computer File Menu Page Page Edit Menu Page View Menu Page Impedance Analyzer Menu Page Page Help Menu Using WT3 to Measure a Woofers Parameters Using WT3 to Measure a Tweeters Parameters Page Using WT3 to Measure a Resistor Page Using WT3 to Measure an Inductor Page Using WT3 to Evaluate a Closed Box Loudspeaker Page Using WT3 to Evaluate a Vented Box Loudspeaker Page Page Using WT3 to Evaluate a Complete Speaker System Page Using WT3 to Diagnose Loudspeaker Fault Conditions Page Page Page Using WT3 to Design a Zobel Network Page Page

WT3 specifications

The Dayton WT3 is a sophisticated and highly regarded tool in the field of audio measurement and analysis, particularly known for its precision in loudspeaker testing. This comprehensive device integrates several advanced features and technologies, making it an essential choice for audio professionals, engineers, and hobbyists alike.

One of the standout characteristics of the Dayton WT3 is its dual-channel capability, allowing users to conduct simultaneous measurements of two different loudspeakers. This feature is particularly useful in stereo systems where matching drivers is essential. The WT3 utilizes a high-resolution analog-to-digital converter (ADC) that ensures accurate and detailed frequency response measurements, providing users with the data they need to refine and optimize their audio setups.

The WT3 is equipped with a user-friendly interface that simplifies the measurement process. Its software is intuitive and runs on Windows, which means that users can easily navigate through various options to configure tests and analyze results. The inclusion of a built-in microphone makes it possible to perform room acoustics measurements, further enhancing its versatility.

Another key technology integrated into the Dayton WT3 is its frequency sweep capability. By generating continuous sine wave sweeps across a wide frequency range, the WT3 can analyze the response of loudspeakers in real-time. This allows for identifying resonances, distortion, and other critical parameters that affect sound quality.

The WT3 also features a range of measurement modes, including impedance measurements, which can be invaluable for understanding how a loudspeaker behaves across different frequencies. This data is displayed in easy-to-read graphs and charts, facilitating a straightforward interpretation of results.

Moreover, the Dayton WT3 utilizes advanced signal processing algorithms that help in reducing noise and other unwanted artifacts that can skew measurements. The device's accurate phase response measurement capability further distinguishes it from competitors, providing essential data for crossover design and speaker alignment.

In summary, the Dayton WT3 combines advanced measurement technology with an intuitive user experience, making it an essential tool for those seeking precise loudspeaker performance insights. Its features and capabilities position it as a valuable asset for both professional audio engineers and enthusiasts dedicated to achieving the best possible sound quality. Whether for designing new speakers or optimizing existing setups, the WT3 delivers reliable performance and accuracy.
Top Page Image Contents