Airlink AWLL3025 user manual Configuring General Settings

Page 12

3.1 Configuring General Settings

Click Change to configure the adapter’s General Connection Setting.

Channel: This setting is for Access Point Mode only.

Tx Rate: Select the desired transmission rate, or leave the default setting of Auto to allow the adapter to automatically select the optimum rate.

SSID: You can manually enter the SSID of the wireless router/access point you wish to connect to.

Any (check box): Allows you to connect to any available wireless router/access point. (Check this box if you’re trying to connect to a public hot spot and don’t know the SSID).

Network Type: Choose from Infrastructure (for connecting to a wireless router/access point) or Ad-Hoc(for computer-to-computer networking, bypassing the wireless router/access point).

Encryption: Choose from Disable WEP, or Enable WEP.

Authentication Mode: Choose from Auto (recommended), Open System, or Shared Key.

Click Apply to save the changes.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model # AWLL3025 User’s Manual Interference Statement FCC CautionFeatures IntroductionInstallation Procedures Install Utility SoftwarePage Page Install Driver Select Install the software automatically and click NextPage Configuring USB Adapter as a Wireless Client Point Page Configuring General Settings Configuring Encryption Security Page Click on WPA Encryption Setting and click Change Configuring Profile Advanced Settings Information Configuring USB Adapter as an Access Point Configuring Access PointChannel Page Authentication Mode select from Open System or Shared Key Configuring MAC Address Filter Filter Type Specifications AppendixTroubleshooting Technical Support
Top Page Image Contents