Wireless-G Exterior Access Point
The Reset Button and Ground
The Access Point's Reset button and ground are located on the back panel.
Reset Button
Ground
| Figure |
Reset Button | There are two ways to Reset the Access Point's factory defaults. Either press the Reset |
| button, for approximately ten seconds, or restore the defaults using the Access Point's Web- |
| based Utility. |
Ground | Before you mount the Access Point, you must ground the Access Point (to a large piece of |
| metal) as a precaution against electric shock. |
Chapter 3: Getting to Know the
IMPORTANT: Resetting the Access Point will erase all of your settings (including wireless security, IP address, and power output) and replace them with the factory defaults. Do not reset the Access Point if you want to retain these settings.
8
The Reset Button and Ground