Wireless-G Exterior Access Point
Device Name. Enter the name you wish to give to the Access Point.
Location. Enter the location of the Access Point.
Get Community. Enter the password that allows
Set Community. Enter the password that allows read/write access to the Access Point’s SNMP information. The default is private.
SNMP
SNMP Trusted Host. You can restrict access to the Access Point’s SNMP information by IP address. Enter the IP address in the field provided. If this field is left blank, then access is permitted from any IP address.
SNMP
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Help information is displayed on the
More for additional details.
Chapter 6: Configuring the | 33 |
The Administration - Management Tab