Wireless-G Exterior Access Point
6.Make sure that you properly ground the Access Point.
7.Line up the Access Point’s
8.Attach a screw (not included) in each of the two holes on the top of the mounting plate so that the Access Point is securely mounted to the wall.
9.Connect the other end of the Ethernet network cable to a switch, router, or other device that supports Power over Ethernet. The Access Point will then be connected to your wired network.
Now that the hardware installation is complete, proceed to "Chapter 5: Setting Up the
Chapter 4: Connecting the
Figure 4-3: Ground the Access Point
Figure 4-4: Attach the Access Point to the Wall
13
Hardware Installation