Accessories
Check that you have the accessories and items shown
Operating Instructions | Remote Control Transmitter | ||
| (N2QAJB000156) | ||
| 1 | 2 | 3 |
| 4 | 5 | 6 |
| 7 | 8 | 9 |
|
| 0 |
|
Batteries for the Remote Control Transmitter
(2 ⋅ R6 (AA) size)
Fitting remote control batteries
1
Pull and hold the hook, then open the battery cover.
23
“R6 (AA)” size |
|
Insert batteries - note correct | Replace the cover. |
polarity ( + and |
|
Do not use rechargeable
They are different in shape and performance and may fail to ensure correct operation.
Battery cautions
The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or cause the batteries to burst.
Observe the following precaution:
1.Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2.Do not combine a used battery with a new one.
3.Do not mix battery types (example:“Zinc Carbon” with “Alkaline”).
4.Do not attempt to charge,
5.Battery replacement is necessary when remote control acts sporadically or stops operating the TV set.
Cable cover removal and fitting
Note:
To avoid interference appearing on the screen, do not bundle the RF cable and mains lead together.
Removal
1. Push down hooks and pull the cover slightly towards yourself to disengage the claws (at 3 points).
2. Slowly pull out in the downward direction.
Fitting
1. Insert the claws (at 3 points) at the bottom end.
2. Push until it clicks.
5
