Instant GigaDriveTM Series
Administration Tab - Backup
Figure
As shown in Figure
Data Backup This is used to back up data from one disk to another. Select Enable data backup from Disk 1 to Disk 2, then click Start Backup Now if you want to start the process immediately. Select Enable data backup from Disk 1 to Disk 2. Under the Backup Time
Config Backup Click the Download button to back up the configuration file to a file. Click the Upload button to upload the configuration file to the Instant GigaDrive™.
Click the Save button to save any changes you have made. Click the Cancel button to clear all changes. Click the Help button to get more information.
EtherFast® Network Attached Storage
Administration Tab - Disk
Figure
The Disk Settings screen, shown in Figure
33 | 34 |