Instant GigaDriveTM Series
| Figure |
LAN | Green. This LED flashes when data is transmitted or |
| received via the network. |
Disk | Green. This LED flashes when the Instant GigaDrive’s hard |
| drive is being accessed. It stays on during the |
Disk Full | Green. This LED lights up when the Instant Gigadrive™ |
| has reached its maximum storage capacity. |
Backup | Green. This LED flashes when the Instant Gigadrive’s back- |
| up utility is active. |
EtherFast® Network Attached Storage
Beeper Codes
The Instant GigaDrive™ has an internal beeper that beeps to indicate certain events.
1 | Beep | This signals that the Reset button or Power switch has been |
|
| pressed. |
2 | Beeps | Repeated every five seconds for one minute, this signals that |
|
| the Instant GigaDrive™ is configured as a DHCP client, but |
|
| no DHCP server responded to the DHCP client’s request. |
3 | Beeps | Repeated every 15 seconds for three minutes, this signals |
|
| that the Instant GigaDrive’s hard disk usage exceeds 98% |
|
| capacity. |
5 | Beeps | Repeated every 15 seconds for three minutes, this signals |
|
| that the Instant GigaDrive™ is overheating. An automatic |
|
| shutdown will be performed three minutes after the first |
|
| beep. |
5 | 6 |