Airlink101 AWLH6080 Configuring WEP encryption, Select WEP from the Set Security Option box

Page 25

Configuring WEP encryption

Select WEP from the Set Security Option box.

Under Wired Equivalent Privacy (WEP), select Shared or Open, depending on the router settings.

In the Key box, you need to type in the encryption key for the router. If you check the Show text in the password field box, your key will appear in the box as you are typing it instead of showing only asterisks. This is helpful as it allows you to double check the key before saving the changes.

Key Length will also be predetermined by the router. Refer to your routers settings to find out what you should select here.

Key Index is the key on the router that is currently in use. Refer to your routers settings to find out what you should choose.

Once you are done, click OK to save your settings.

25

Image 25

Contents 300N Draft 802.11n Wireless PCI Adapter Table of Contents Features Package ContentsIntroduction Install Driver & Utility InstallationPage Page Page Page Select Install the software automatically and click Next Page Click Finish Verify Driver Installation Page Configuring the Adapter Page Page Page Page Wireless Information Wireless MonitorAP List Profile Settings Page Click on Profile Settings then New Configuring EncryptionPage Select WEP from the Set Security Option box Configuring WEP encryptionSelect WPA/WPA2-PSK from the Set Security Option box Configuring WPA/WPA2-PSK Encryption for home usersSelect WPA/WPA2 from the Set Security Option box Configuring WPA/WPA2 Encryption for corporate networksSelect 802.1x from the Set Security Option box Configuring 802.1x authentication for corporate networksAd-hoc and Peer-to-Peer Wireless Networks Open the Wireless Monitor Page About Appendix a Specifications Federal Communication Commission Interference Statement Appendix B InformationEuropean Union Notice Technical Support