Airlink101 AWLH6080 user manual Open the Wireless Monitor

Page 30

Open the Wireless Monitor.

Click on Profile Setting, then click on New.

The profile settings box will appear.

First change the network type to Adhoc. (Infrastructure is for when you are using a router).

Enter a profile name into the Profile Name box so that you can identify the profile.

Type in a network name (SSID) into the SSID box

Select your desired Channel

You can also choose between no security or WEP security. If you choose WEP security, you can follow the instructions in the Configuring Encryption section of the manual.

Click OK to save the profile.

30

Image 30

Contents 300N Draft 802.11n Wireless PCI Adapter Table of Contents Package Contents FeaturesIntroduction Installation Install Driver & UtilityPage Page Page Page Select Install the software automatically and click Next Page Click Finish Verify Driver Installation Page Configuring the Adapter Page Page Page Page Wireless Monitor Wireless InformationAP List Profile Settings Page Configuring Encryption Click on Profile Settings then NewPage Configuring WEP encryption Select WEP from the Set Security Option boxConfiguring WPA/WPA2-PSK Encryption for home users Select WPA/WPA2-PSK from the Set Security Option boxConfiguring WPA/WPA2 Encryption for corporate networks Select WPA/WPA2 from the Set Security Option boxConfiguring 802.1x authentication for corporate networks Select 802.1x from the Set Security Option boxAd-hoc and Peer-to-Peer Wireless Networks Open the Wireless Monitor Page About Appendix a Specifications Appendix B Information Federal Communication Commission Interference StatementEuropean Union Notice Technical Support