Airlink101 AWLH6080 user manual

Page 31

Once that is done, click on the AP List.

Select your new profile from the profile chooser and click Activate to enable the profile.

You will need to configure all other computers that you are planning on connecting to your ad-hoc network with the same settings that you input on this screen. Every computer has to be set up exactly the same. If any of the settings are different, the network will not function.

Troubleshooting: If you are having trouble connecting, if the connection is slow, or if it is unstable, you will want to try changing channels. Start with channel 1 and work your way up until you find a channel that gives you a stable connection. Each time you change the channel, save the settings, then reboot the computer. Also make sure that you do this on every ad-hoc machine so that they will all be set to the same channel.

31

Image 31

Contents 300N Draft 802.11n Wireless PCI Adapter Table of Contents Features Package ContentsIntroduction Install Driver & Utility InstallationPage Page Page Page Select Install the software automatically and click Next Page Click Finish Verify Driver Installation Page Configuring the Adapter Page Page Page Page Wireless Information Wireless MonitorAP List Profile Settings Page Click on Profile Settings then New Configuring EncryptionPage Select WEP from the Set Security Option box Configuring WEP encryptionSelect WPA/WPA2-PSK from the Set Security Option box Configuring WPA/WPA2-PSK Encryption for home usersSelect WPA/WPA2 from the Set Security Option box Configuring WPA/WPA2 Encryption for corporate networksSelect 802.1x from the Set Security Option box Configuring 802.1x authentication for corporate networksAd-hoc and Peer-to-Peer Wireless Networks Open the Wireless Monitor Page About Appendix a Specifications Federal Communication Commission Interference Statement Appendix B InformationEuropean Union Notice Technical Support