Airlink101 AWLH6080 user manual Installation, Install Driver & Utility

Page 4

2. Installation

2.1 Install Driver & Utility

This section provides instructions on how to install the 300N Draft 802.11n Wireless PCI Adapter. The driver is installed along with the utility.

Note: Be sure to power off your computer before inserting the Cardbus adapter.

Step 1 Insert the PCI adapter into an available PCI slot and turn on your computer.

Step 2 After turning on the computer, Windows will launch the Found New Hardware Wizard. The Found New Hardware Wizard appears differently depending on your operating system. Click Cancel to quit the wizard and insert the Installation CD into your CD drive.

Step 3 The Autorun screen will pop up. Select Install Utility and Driver from the menu.

4

Image 4

Contents 300N Draft 802.11n Wireless PCI Adapter Table of Contents Features Package ContentsIntroduction Installation Install Driver & UtilityPage Page Page Page Select Install the software automatically and click Next Page Click Finish Verify Driver Installation Page Configuring the Adapter Page Page Page Page Wireless Monitor Wireless InformationAP List Profile Settings Page Configuring Encryption Click on Profile Settings then NewPage Configuring WEP encryption Select WEP from the Set Security Option boxConfiguring WPA/WPA2-PSK Encryption for home users Select WPA/WPA2-PSK from the Set Security Option boxConfiguring WPA/WPA2 Encryption for corporate networks Select WPA/WPA2 from the Set Security Option boxConfiguring 802.1x authentication for corporate networks Select 802.1x from the Set Security Option boxAd-hoc and Peer-to-Peer Wireless Networks Open the Wireless Monitor Page About Appendix a Specifications Appendix B Information Federal Communication Commission Interference StatementEuropean Union Notice Technical Support