Airlink101 AWLH6080 user manual Introduction, Package Contents, Features

Page 3

1. Introduction

Congratulations on your purchase of the 300N Draft 802.11n Wireless PCI Adapter. The 300N PCI Adapter provides wireless data rate of up to 300 Mbps* when used with other AirLink101® 300N wireless products. The high bandwidth combined with extended wireless coverage delivers fast and reliable connection for all of your networking applications.

A full range of security features such as WEP, WPA-PSK, and WPA2-PSK provide the highest level of wireless network security. The bundled Wireless Utility allows you to set up the adapter with an easy-to-use user interface. Best of all the 300N PCI Adapter works with 802.11g and 802.11b network devices ensuring compatibility with your existing wireless products.

1.1 Package Contents

Before you begin the installation, please check the items of your package. The package should include the following items:

Wireless PCI Adapter

Antenna

Quick Installation Guide

Installation CD (Driver/Utility/Manual)

1.2Features

Industry’s highest wireless data rate of up to 300 Mbps* with IEEE 802.11n draft specification version 1.0.

3 antennas for wider coverage and continuous connectivity eliminates dead spots

64-bit/128-bit WEP encryption, Pre-shared Key (PSK), and Wi-Fi Protected Access (WPA2) and WPA support provide full protection for your wireless connection

Higher data rate increases the reliability and stability of wireless connections

Great for environments with higher wireless data traffic requirements

Fully backward-compatible with 802.11b/g devices

Works best with AirLink101® 300N wireless router AR680W

3

Image 3
Contents 300N Draft 802.11n Wireless PCI Adapter Table of Contents Package Contents FeaturesIntroduction Install Driver & Utility InstallationPage Page Page Page Select Install the software automatically and click Next Page Click Finish Verify Driver Installation Page Configuring the Adapter Page Page Page Page Wireless Information Wireless MonitorAP List Profile Settings Page Click on Profile Settings then New Configuring EncryptionPage Select WEP from the Set Security Option box Configuring WEP encryptionSelect WPA/WPA2-PSK from the Set Security Option box Configuring WPA/WPA2-PSK Encryption for home usersSelect WPA/WPA2 from the Set Security Option box Configuring WPA/WPA2 Encryption for corporate networksSelect 802.1x from the Set Security Option box Configuring 802.1x authentication for corporate networksAd-hoc and Peer-to-Peer Wireless Networks Open the Wireless Monitor Page About Appendix a Specifications Federal Communication Commission Interference Statement Appendix B InformationEuropean Union Notice Technical Support