Airlink101 AWLL3055 user manual Click on WPA Encryption Setting and click Change

Page 16

1. Select TKIP for Encryption, WPA PSK for Authentication Mode, and click Apply.

2.Click on WPA Encryption Setting and click Change.

3.Enter the appropriate passphrase in the Passphrase field under the Pre-shared

Key section and click Apply. (The passphrase must be identical to the passphrase set on your wireless router/access point and it has to be between 8 to 63 ASCII characters long).

Image 16

Contents 802.11g USB Adapter with +10dBi Antenna Table of Contents Interference Statement FCC CautionPackage Contents FeaturesIntroduction Install Utility Software Installation ProceduresClick Install Driver and Utility from the Setup menu Page Page Install Driver Select Install the software automatically and click NextConfiguring USB Adapter as a Wireless Client Page Point Page Configuring General Settings Configuring Encryption Security Page Click on WPA Encryption Setting and click Change Configuring Profile Advanced Settings Information Configuring Access Point Configuring USB Adapter as an Access PointChannel Page Authentication Mode select from Open System or Shared Key Configuring MAC Address Filter Filter Type Appendix For Windows 98SE/ME Page Technical Support