Airlink101 AWLL3055 user manual Point

Page 11

Step 2 Verify that the adapter has adequate Signal Strength and Link Quality and then restart the computer.

Mode: Select from Station or Access Point. For more information regarding Access Point, please refer to the next section, 4. Configuring USB Adapter as an Access

Point.

Network Adapter: Displays the name of the USB adapter.

Available Network: Lists all the available wireless router/access point in your area. You can click on the Refresh button to update the list.

Selected Network Information: Displays the network information for the currently selected SSID. (An SSID must be highlighted first).

Link Status: Displays the current link status.

Signal Strength: Displays the current signal strength.

Link Quality: Displays the current link quality.

Tx Frame: Displays the number of frames transmitted.

Rx Frame: Displays the number of frames received.

11

Image 11
Contents 802.11g USB Adapter with +10dBi Antenna Table of Contents FCC Caution Interference StatementIntroduction FeaturesPackage Contents Click Install Driver and Utility from the Setup menu Installation ProceduresInstall Utility Software Page Page Select Install the software automatically and click Next Install DriverConfiguring USB Adapter as a Wireless Client Page Point Page Configuring General Settings Configuring Encryption Security Page Click on WPA Encryption Setting and click Change Configuring Profile Advanced Settings Information Channel Configuring USB Adapter as an Access PointConfiguring Access Point Page Authentication Mode select from Open System or Shared Key Configuring MAC Address Filter Filter Type Appendix For Windows 98SE/ME Page Technical Support