Airlink101 AWLL3055 user manual Configuring USB Adapter as a Wireless Client

Page 9

For Windows 2000, click Yes at the Digital Signature screen.

For Windows 98SE or ME, insert the Windows 98SE or ME CD if prompted to do so and click OK.

Step 4 Click Finish. Restart the computer if you are prompted to do so.

3. Configuring USB Adapter as a Wireless Client

The USB adapter can be set to either Station or Access Point Mode from the Mode drop-down menu. Station mode is the default selection and should be selected if you want to connect to a wireless router/access point or conduct peer-to-peer networking.

To open the utility, go to Start, (All) Programs, IEEE 802.11g USB Wireless LAN Adapter, IEEE 802.11g USB Wireless LAN Utility.

9

Image 9

Contents 802.11g USB Adapter with +10dBi Antenna Table of Contents FCC Caution Interference StatementFeatures Package ContentsIntroduction Installation Procedures Install Utility SoftwareClick Install Driver and Utility from the Setup menu Page Page Select Install the software automatically and click Next Install DriverConfiguring USB Adapter as a Wireless Client Page Point Page Configuring General Settings Configuring Encryption Security Page Click on WPA Encryption Setting and click Change Configuring Profile Advanced Settings Information Configuring USB Adapter as an Access Point Configuring Access PointChannel Page Authentication Mode select from Open System or Shared Key Configuring MAC Address Filter Filter Type Appendix For Windows 98SE/ME Page Technical Support