Airlink101 AWLL3055 Install Driver, Select Install the software automatically and click Next

Page 8

2.2 Install Driver

Note: In most cases, Windows will automatically install the driver after the computer is restarted. If the Found New Hardware Wizard appears, follow the instructions below. The Found New Hardware Wizard will look different depending on your operating system. Follow the on-screen instructions to complete the installation. For Windows 98SE and ME users, you may be prompted to insert the Windows 98SE or ME CD during the driver installation. Be sure to have your Windows 98SE or ME CD ready.

Step 1 After the computer is restarted, insert the USB adapter into the USB port of the computer. If there is not enough room to insert the adapter directly to the USB port, you may use the supplied USB extension cable for more space.

Step 2 Select Install the software automatically and click Next.

Step 3 For Windows XP, click Continue Anyway at the Windows Logo Compatibility screen.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 802.11g USB Adapter with +10dBi Antenna Table of Contents Interference Statement FCC CautionIntroduction FeaturesPackage Contents Click Install Driver and Utility from the Setup menu Installation ProceduresInstall Utility Software Page Page Install Driver Select Install the software automatically and click NextConfiguring USB Adapter as a Wireless Client Page Point Page Configuring General Settings Configuring Encryption Security Page Click on WPA Encryption Setting and click Change Configuring Profile Advanced Settings Information Channel Configuring USB Adapter as an Access PointConfiguring Access Point Page Authentication Mode select from Open System or Shared Key Configuring MAC Address Filter Filter Type Appendix For Windows 98SE/ME Page Technical Support
Top Page Image Contents