Alloy Computer Products WDS2454AP manual II. Radius Server

Page 16

II.Radius Server

A RADIUS server is used to authenticate the connection for clients and return authentication key parameters to the users to connect to the wireless network.

RADIUS (Remote Authentication Dial-In User Service) utilises a RADIUS server for authentication and the use of dynamic TKIP, AES, or WEP.

Re-authentication Time: Enter a time in seconds that uses will have to re-authenticate with the RADIUS server.

Click the “Add” button to add the Radius Server IP Address, Server UDP port and Shared Secret. The shared secret is used to allow communication between the AP and the RADIUS Server.

12

Image 16

Contents WDS2454AP Regulatory Information/disclaimers USA-FCC Federal Communications Commission statementFCC Radio Frequency Exposure statement FCC Interference StatementSafety Information Protection requirements for health and safety Article 3.1aCE Mark Warning Effective use of the radio spectrum ArticleTable of Contents About this Guide Unpacking and Setup Hardware Instalation Connecting to your office LAN Switch or Hub Check the installationConfiguring the Wireless LAN Access Point Page Page LAN Setup II. Wireless SettingsPage III. WDS Links Access Control List II. Radius Server III. Wired Equivalent Privacy WEP Group Key SettingWi-Fi Protected Access WPA IV .1x SecurityStation II. Wireless Statistics III. Event Report Wireless Clients II. Access PointsPage Page Change Password II. Lock Access PointGeneral Technical SpecificationsPhysical and Environmental