Hardware connections
Notebook
Switch/Hub
PC
Ethernet port
Notebook
Wireless LAN Networking
Connecting to your office LAN (Switch or Hub)
1.Plug one end of the RJ45 network cable to the Switch/Hub port,
2.Plug the other end of the RJ45 network cable to the Wireless Access Point.
Check the installation
The control LEDs of the Access Point are clearly visible and the status of the network link can be seen instantly:
1.With the power source on, once the device is connected, the Power, LAN and WLAN port link LEDs of the unit will light up indicating normal status.
2.If the LAN Port’s Link indicator does not light up then check to make sure that the cable has been inserted correctly.
4