Altinex PE1004CF manual Altinex Policy

Page 13

SPECIAL APPLICATION

Cause 3: Cable connections are incorrect.

Solution: Make sure that the cables are connected properly. Also, make sure that the continuity and wiring are good. If there is still no sound present, see Cause 4.

Cause 4: Destination amplifier has a problem.

Solution 1: Make sure that the destination amplifier is powered. If there is still no sound, see Solution 2

Solution 2: Set the volume of the destination amplifier to a reasonable level. If there is still no sound, call ALTINEX at (714) 990-2300.

ALTINEX POLICY

9

9.1 LIMITED WARRANTY/RETURN POLICY

Please see the Altinex website at www.altinex.com for details on warranty and return policy.

9.2 CONTACT INFORMATION

ALTINEX, INC

592 Apollo Street

Brea, CA 92821 USA

TEL: 714 990-2300

TOLL FREE: 1-800-ALTINEX

WEB: www.altinex.com

E-MAIL:solutions@altinex.com

400-0210-001

12

Image 13
Contents PE1004CF Table of Contents Precautions / Safety Warnings About Your PE1004CF Technical SpecificationsDiagram 1 Input Selection Automatic Input Selection Description of PE1004CF Application DiagramsManual Input Selection Diagram 2 Typical Setup Typical Application Diagram 3 Internal View PE1004CF Block Diagram Equalization Diagram 4 Switch SettingsDescription of Commands Installing Your PE1004CFOperation RS-232 ControlStatus Freset10. + EQnTroubleshooting Guide Altinex Policy