SPECIAL APPLICATION
PRECAUTIONS / SAFETY WARNINGS | 1 |
Please read this manual carefully before using your PE1004CF. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your PE1004CF and to prevent fire and shock hazard. Please read them carefully and heed all warnings.
1.1 GENERAL
∙There are no
1.2 INSTALLATION
∙To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the PE1004CF in direct sunlight, near heaters or heat radiating appliances, or near any liquid. Exposure to direct sunlight, smoke, or steam can harm internal components.
∙Handle the PE1004CF carefully. Use ESD safety precautions and wear a ground strap when handling the PE1004CF.
∙Do not pull the cables that are attached to the
PE1004CF.
1.3 CLEANING
∙Unplug the PE1004CF before cleaning.
∙Clean only with a dry cloth. Never use strong detergents or solvents, such as alcohol or thinner. Do not use a wet cloth or water to clean the unit.
1.4 HANDLING
∙Handle the PE1004CF carefully. Dropping or jarring can damage the card.
∙The PE1004CF contains components that are sensitive to electro static discharge (ESD). Always use ESD safety precautions when touching the card.
1.5 FCC / CE NOTICE
∙This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
∙This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their expense.
∙Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.
2 |