Altinex MT106-101 Summary of Commands VER, Sig, Clr, Hpos, Vpos, Hsize, Vsize, Brig, Sharp, Color

MULTI-TASKER

25. [CLR]

This command clears the members for a single group or for all nine groups.

Command Format: [CLRGkUi]

Gk = group number (k = # from 1-9)

Ui = unit number (i = # from 0-9)

Example:

1)To clear group #1, send the [CLRG1U1] command. This command clears the members for the specified group only.

2)To clear all groups of unit 1, send the [CLRG[U1] command.

26.[G]

This command is used to request group data. With the command, the user can identify which input or output of a particular group is on.

Command Format: [GkUi]

Gk = group number (k = # from 1-9)

Ui = unit number (i = # from 0-9)

Example:

In unit ID0, if group 1 has DA Cards with outputs 1 and 2 on, while group 2 has SW Cards with input 2 on:

[G1]: will return feedback as ON12 G1U0.

[G2]: will return feedback as ON2 G2U0.

27. [RD]

This command displays the members in each group.

Command Format: [RDGkUi]

Gk = group number (k = # from 1-9)

Ui = unit number (i = # from 0-9)

member = C1 - C19 (card 1 to 19)

(1-8 for MT100-101 or 1-4 for MT100-106)

Example:

The cards in slots 1, 2 and 19 are part of group 5 in unit 1. Read the member data for group 5 of unit 1, by sending the command [RDG5U1]. The system will return feedback as follows:

C1C2C19 G5U1.

7.3 SUMMARY OF COMMANDS

1)	[VER]	Receives software version
2)	[Ci]	Receives status of the card
3)	[SIG]	Signal present command
4)	[CLR]	Resets card to defaults
5)	[ON]	Select Input Source
6)	[ + ]	Increments and Decrements
	[ - ]	selected commands
7)	[HPOS]	Set the Horizontal Position
8)	[HPOS]	Horiz. Position Adjust/Status
9)	[VPOS]	Set the Vertical Position
10)	[VPOS]	Vert. Position Adjust/Status
11)	[HSIZE]	Set the Horizontal Size
12)	[HSIZE]	Horizontal Size Adjust/Status
13)	[VSIZE]	Set the Vertical Size
14)	[VSIZE]	Vertical Size Adjust/Size
15)	[BRIG]	Set Brightness level
16)	[BRIG]	Brightness Adjust/Status
17)	[SHARP]	Set Sharpness level
18)	[SHARP]	Sharpness Adjust/Status
19)	[COLOR]	Set Color value
20)	[COLOR]	Color Adjust/Status
21)	[HUE]	Set Hue value
22)	[HUE]	Hue Adjust/Status
23)	[HELP]	Display available commands
24)	[WR]	Group multiple cards
25)	[CLR]	Clear group configurations
26)	[G]	Request group data
27)	[RD]	Display group members

13