COLORC2U3 | Altinex MT106-101 specs

MULTI-TASKER

20. [COLORCi] - Status/Adjust

The COLOR command, with no value, selects the Color adjustment and makes it the active control. It is also used to return the status of the current Color level. As the active control, it may be adjusted using the [ + ] and [ - ] commands.

Command Format: [COLORCiUy]

Ci = card ID (i = slot number)

Uy = unit id (i = 0 to 9) (refer to the MT100-100 user’s guide for explanation)

Example:

There is an MT106-101 in slot 2 of unit ID 3. View the current Color level and adjust the color for the best possible picture.

[COLORC2U3] 2

[COLORC2U3]	= STATUS/Current value
2	= Feedback of current value
[ + ] & [ - ]	= Adjust as required

21. [HUE] - Set Value

This command sets the Hue to an absolute value. It also makes the Hue adjustment the active control.

Command Format: [HUEnCiUy]

n = a value from 0 to 10 (Default = 10)

Ci = card ID (i = slot number)

Uy = unit id (i = 0 to 9) (refer to the MT100-100 user’s guide for explanation)

Example:

An MT106-101 is in slot 4 of unit ID 2. Set the Hue to the value of 7 by sending the command [HUE7C4U2].

22. [HUE] - Status/Adjust

This command selects the Hue adjustment and makes it the active control. It is also used to return the value of the current Hue level. As the active control, it may be adjusted using the [ + ] and [ - ] commands.

Command Format: [HUECiUy]

Ci = card ID (i = slot number)

Uy = unit id (i = 0 to 9) (refer to the MT100-100 user’s guide for explanation)

Example:

There is an MT106-101 in slot 2 of unit ID 3. View the current Hue and set the hue for a good image.

[HUEC2U3] 2

[HUEC2U3]	= STATUS/Current value
2	= Feedback of current value
[ + ] & [ - ]	= Adjust as required

23. [HELP]

In MTSetup.exe, this command displays a list of the commands available for the MT106-101 along with a brief description.

Command Format: [HELPCiUy]

Ci = card ID (i = slot number)

Uy = unit id (i = 0 to 9) (refer to the MT100- 100 user’s guide for explanation)

24. [WR]

This command groups multiple cards in the Enclosure. Each unit contains a maximum of nine groups.

Command Format: [WRCn…GkUi]

Cn = card ID No. (n = slot # from 1 to 19) (1-8 for MT100-101 or 1-4 for MT100-106)

Gk = group number (k = # from 1-9)

Ui = unit number (i = # from 0-9)

Example:

To group cards #1, 2, and 3 as group 5 of unit #1, send the command [WRC1C2C3G5U1]. After executing this command, cards 1, 2 and 3 will be grouped together as group 5 of unit 1.