Section 5 Other Features of this Fax
Turning Password Check
Communication ON/OFF
Turn Password Check Communication ON when you want to limit to and from whom fax communication can be accomplished. There are separate settings for controlling transmissions and receptions.
*If there are no Permit Telephone Numbers or Permit IDs registered in this fax, Password Check Communication will not be possible even if it is turned ON here.
*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1Press the Default key. The Default Setting screen will appear.
2 | Press the “Fax default” key. | |
|
| (inch) |
| ||
|
|
|
(metric)
3 | Press the “T” cursor key until “Password Check Comm.” |
is highlighted. | |
|
|
4 | Press the “Change #” key. |
|
|
5 | To turn Password Check ON for transmissions, press the |
“ON” key under “Send”. |
(inch)
(metric)
6 | To turn Password Check ON for receptions, press the |
“ON” key under “Receive”. |
7 | Press the “Close” key. |
The message display will return to the same screen as |
was displayed in step 3. If you are finished making settings, press the Reset key.
