Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
Preparations
When using the fax functions of this machine for the first time after purchasing your Fax System, perform the procedures as explained in “Setting the Type of Phone Line” through “Setting the Current date And Time (Date & Time setting)”.
*If your service representative performs these settings during
Designating the Type of Phone Line Being Used (Line Type setting) (Inch version only)
Set the type of phone line here to correspond to the type of telephone service that you are using. BE SURE the type of phone line you select here is correct because, if the setting is incorrect, fax communication will be impossible.
*Prior to operation, check the message display to make sure that the touch panel is in the initial mode for fax operation.
(Refer to “What is the “Initial Mode”?” on page
*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the basic copy screen.
1Press the Default key. The Default Setting screen will appear.
4
5
6
Press either the “Tone Line (DTMF)” key or the “Pulse Line(10PPS)” key, as appropriate.
Press the “Close” key. The message display will return to the same screen as was displayed in step 3.
If you are finished making settings, press the Reset key to return to the initial mode.
2 | Press the “FAX default” key. | |
|
|
|
|
|
|
3 | Make sure that “Line Type” is highlighted and press the |
“Change #” key. | |
|
|
