Xerox FAX System (J) manual Selecting the Automatic Reception Mode Receive Mode setting

Section 7 Various Settings and Registration

Selecting the Automatic Reception Mode (Receive Mode setting)

This fax has 2 or 3 automatic reception modes (depending upon the model version). The inch version of this fax offers the Automatic Fax Reception, Auto FAX/TEL Switching and D.R.D. Reception modes. The metric version contains the Automatic Fax Reception and Auto FAX/TEL Switching modes. Select from among the available modes that are available for your fax machine.

* If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.

1

2

3

4

Press the Default key. The Default Setting screen will appear.

Press the “Fax default” key.

(inch)

(metric)

Press the “T” key until “Receive Mode” [“Reception mode”] is highlighted.

Press the “Change #” key.

5	Select the desired reception mode by pressing either the
	“Fax Reception” [“Fax Rx”] key, the “Auto Fax/Tel. SW”

key or the “D.R.D.” key, as appropriate.

* The “D.R.D.” key will not be displayed in the metric version of this fax machine.

* If you selected “D.R.D.”, go directly to step 7. (inch)

(metric)

6	If you selected “Fax Reception” or “Auto Fax/Tel. SW”,
	press the “Close” key. If you are finished making settings,

press the Reset key to return to the initial mode.

7	Select the desired ring pattern.
	• Pattern 1: Normal Ring

• Pattern 2: Double Ring

• Pattern 3: S-S-L (Short-Short-Long)

• Pattern 4: S-L-S (Short-Long-Short)

(inch)

8	Press the “Close” key. If you are finished making settings,
	press the Reset key to return to the initial mode.

7-8