Xerox FAX System (J) manual Modifying or Deleting Registered Information, Deleting a program key

Section 5 Other Features of this Fax

Modifying or Deleting Registered Information

*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.

1	Press the “Register” key. The Registration Select screen
	will appear.

(inch)

(metric)

4	If you want to delete the registered program key, press
	the “Delete” key and then go to the next step. If you want

to modify the registered information, press the “Change contents” key and then go directly to step 6.

(inch)

(metric)

			> Deleting a program key
			5	Press the “Yes” key.
				The message display will return to the same screen as
				was displayed in step 3.
				If you want to continue deleting other program keys,
				repeat steps 3 through 5. If you are finished deleting
				program keys, press the Reset key.
2	Press the “Dial” key.
		(inch)
			> Modifying registered information
			6	If you want to modify the abbreviated number (the
				displayed number of the speed-dial key under which the
				program key is registered), press the “Abbr. #” key. If you
				want to modify any other basic information, press the key
				that corresponds to that information. (To modify
		(metric)		information, refer to the corresponding step under
				“Registering New Program Keys” on page 5-36.)

3	Press the speed-dial key (program key) containing the
	information you want to modify or delete.

* If that key is not displayed, use the “T” and/or “S” cursor keys to switch to the screen that displays the key that you want.

5-38