Xerox FAX System (J) manual Making More Detailed Settings

Section 2 Fax Operation (Basic Use)

4	Press the “One-touch key” key.
		(inch)

(metric)

5	Use the keypad to enter the fax number you want to
	register under that one-touch key. (Maximum 32 digits)

(inch)

(metric)

• “” and “” cursor keys...Use to move the cursor.

	“Delete” key...Press to delete the character that the
	cursor is currently under. (When the cursor is at the
	last space, the previous character will be deleted.)
	“Space” key...Press to enter a space.
	“Pause” key...Press to enter a slight pause (indicated by
	a hyphen) at that point in dialing.
6	Press the “Next” key.
7	Enter the name of the other party. (Maximum 20
	characters)
	* In order to enter characters, refer to “Entering
	Characters” on page 2-11.
8	Check the registered information. If you want to change
	any portion of it, press the key that corresponds to the

desired item and change the information as desired. * If you want to register this one-touch key with the entered information as is, go directly to step 20.

zMaking More Detailed Settings

9	If you want to perform more detailed settings like
	selecting the transmission speed, or designating this

one-touch key for F-Code Based Communication or Encrypted Transmission, press the “Setting” key and then go to the next step.

10	Select the desired transmission speed from among those
	available: “33600bps”, “14400bps” and “9600bps”.

(inch)

(metric)

11	If you want to designate this key for F-Code Based
	Communication, press the “Subaddress Tx” key and then

go to the next step.

If you want to designate this key for Encrypted Transmission, go directly to step 15.

If you want to register this one-touch key with the entered information as is, press the “Close” key and proceed directly to step 20.

12	To use this key for F-Code Based Communication, press
	the “On” key. The Subaddress/Password Input screen will

appear.

2-14